1
00:00:00,180 --> 00:00:07,590
So today we're gonna go ahead and start with legacy and legacy is going to be a Windows machine.

2
00:00:07,600 --> 00:00:12,790
The reason we're starting with legacy is Windows is a very familiar operating system.

3
00:00:12,790 --> 00:00:20,620
The difficulty rating is very very easy as you can see and I think it will be a nice introductory video

4
00:00:20,620 --> 00:00:21,940
on what to do.

5
00:00:22,030 --> 00:00:23,720
So I have connected to the network.

6
00:00:23,730 --> 00:00:32,020
I'm going to open up a new tab and I'm going to start with my scanning process here and in order to

7
00:00:32,020 --> 00:00:37,780
scan this machine this machine is going to live at 10 dot 10 that turned up for I'm going to type in

8
00:00:37,780 --> 00:00:39,040
the command here

9
00:00:43,970 --> 00:00:47,470
and I'm going to hit enter now.

10
00:00:47,510 --> 00:00:50,060
This should give you time to type it in and follow along.

11
00:00:50,570 --> 00:00:57,440
While this is going on let's talk through some things first things first we are running a cool a tool

12
00:00:57,440 --> 00:01:02,840
called n map this cool tool is network mapping.

13
00:01:02,840 --> 00:01:10,010
So it stands for network mapper what we're doing here is we are looking for open ports now and that

14
00:01:10,010 --> 00:01:14,550
can run on the TPP side and the UDP side.

15
00:01:14,570 --> 00:01:18,230
Right now we are working on the T S.P. side.

16
00:01:18,230 --> 00:01:25,070
So what we are doing is the syntax here is we are scanning for all here this capital means all we're

17
00:01:25,070 --> 00:01:30,620
searching for everything we're searching at a dash T which is a speed of four.

18
00:01:30,680 --> 00:01:37,190
The speed runs 1 through 5 and we're looking through all ports one through sixty five thousand five

19
00:01:37,190 --> 00:01:38,470
hundred and thirty five.

20
00:01:38,480 --> 00:01:42,320
Don't quote me on that I'm not sure but I think that sounds right.

21
00:01:42,320 --> 00:01:45,770
And then lastly we're scanning against this IP address.

22
00:01:45,770 --> 00:01:49,250
Now that may be a little confusing and I may have gone through that quick.

23
00:01:49,250 --> 00:01:55,730
So let's go ahead and just do a math dash dash help and we can talk through this a little further.

24
00:01:55,730 --> 00:02:03,050
So if you're ever confused with anything and you need to know what syntax is if you come into a dash

25
00:02:03,080 --> 00:02:09,020
help of a program or you can use the man command in Linux you're going to get something similar to this

26
00:02:09,080 --> 00:02:11,930
a printout of all the commands and what they do.

27
00:02:11,930 --> 00:02:15,460
So let's cover again what it is that we just did.

28
00:02:15,470 --> 00:02:21,670
Now we did and map and map by default runs this dash as asked.

29
00:02:21,680 --> 00:02:26,350
We didn't actually hit the type it so this stands for a stealth scan.

30
00:02:26,480 --> 00:02:30,150
Now a stealth scan is a basic scan.

31
00:02:30,170 --> 00:02:32,360
It was meant to be stealthy back in the day.

32
00:02:32,390 --> 00:02:34,010
And it's really not.

33
00:02:34,010 --> 00:02:36,760
We'll talk about this here in a second.

34
00:02:36,770 --> 00:02:40,850
There's also the dash as you for UDP scan.

35
00:02:40,910 --> 00:02:47,810
So really all you're going to be using is between these two you're going to want to look on the TCB

36
00:02:47,810 --> 00:02:56,060
side and the UDP side and we'll talk about that as well so we need to specify what ports we're going

37
00:02:56,060 --> 00:02:59,410
to scan if we just leave it out.

38
00:02:59,420 --> 00:03:05,700
If we take out the dash P dash we're going to be scanning against the top 1000 ports.

39
00:03:05,750 --> 00:03:13,400
Now we can specify specific ports like Port 22 here or they've got port 53 111.

40
00:03:13,460 --> 00:03:14,600
This is UDP here.

41
00:03:14,630 --> 00:03:19,850
So you can specify specifics you could specify a range.

42
00:03:20,030 --> 00:03:26,160
But it's really just easier to scan all parts if you're scanning the top 1000 very quick.

43
00:03:26,300 --> 00:03:27,500
Maybe that's OK.

44
00:03:27,530 --> 00:03:34,430
But in all reality it's best to scan all ports because you don't know if a high number of ports going

45
00:03:34,430 --> 00:03:35,060
to be out there.

46
00:03:35,060 --> 00:03:41,210
That's not a common port that's running some weird service and you don't know what's going to pop up.

47
00:03:41,210 --> 00:03:47,210
So on the TCT side very important in my opinion to be running dash P Dash.

48
00:03:47,360 --> 00:03:51,140
Now when you're scanning UDP you don't really have to specify the ports.

49
00:03:51,140 --> 00:03:57,090
If you were to scan all ports on the UDP side you're going to be scanning for ever.

50
00:03:57,530 --> 00:04:04,640
So my opinion is to just leave out the ports on the UDP side scan the top one thousand and play around

51
00:04:04,640 --> 00:04:07,190
with it get accustomed to how you like scanning.

52
00:04:07,340 --> 00:04:13,730
But for me personally I don't miss much by not scanning outside the top 1000 and I don't have enough

53
00:04:13,730 --> 00:04:21,370
time to wait for all sixty five thousand ports to report back on a UDP scan so coming through and doing

54
00:04:21,370 --> 00:04:25,200
a little bit more we could skip down just a little bit.

55
00:04:25,270 --> 00:04:30,850
You see a lot of stuff in here that we're skipping over S.V. we're doing service detection dash 0 for

56
00:04:30,850 --> 00:04:33,330
OS detection operating system.

57
00:04:33,430 --> 00:04:38,640
Now those are actually all covered if we scroll down under this dash a.

58
00:04:39,160 --> 00:04:46,540
So we're doing OS detection version detection script scanning and trace route so we don't need to specify

59
00:04:46,570 --> 00:04:48,240
all those switches.

60
00:04:48,400 --> 00:04:50,640
We just need to specify a dash a.

61
00:04:50,650 --> 00:04:52,510
And it works just fine.

62
00:04:52,510 --> 00:04:56,710
You can see down here is somebody specified dash a as an example.

63
00:04:56,710 --> 00:04:57,950
Perfect.

64
00:04:57,970 --> 00:04:58,800
OK.

65
00:04:58,840 --> 00:05:01,500
And then the last thing is this timing.

66
00:05:01,570 --> 00:05:06,700
So we've got a TI 135 and it says the higher is faster that is accurate.

67
00:05:07,270 --> 00:05:09,620
I personally like to scan it at T for.

68
00:05:09,640 --> 00:05:12,620
You could also get away with scanning a T three.

69
00:05:12,700 --> 00:05:17,620
I have noticed no performance issues or miss ports running at either of these.

70
00:05:17,620 --> 00:05:24,290
Now t one might be very slow for you and T five might be fast but t five might miss some things and

71
00:05:24,290 --> 00:05:27,850
to one might take forever if you're in a time crunch.

72
00:05:27,880 --> 00:05:31,840
Now we've been scanning this already and we're at ninety nine percent.

73
00:05:31,840 --> 00:05:36,790
We've been scanning for almost five minutes here and you can see that the average scan may take anywhere

74
00:05:36,790 --> 00:05:40,440
I've had them take from seconds to over an hour before.

75
00:05:41,320 --> 00:05:45,700
But this is my my my method here right.

76
00:05:45,700 --> 00:05:49,140
This is the easiest simplest way to scan a machine.

77
00:05:49,150 --> 00:05:54,910
You will see all kinds of and map syntax out there and maybe you find something in here and you start

78
00:05:54,910 --> 00:06:00,730
playing around with things like Max retried or a rate limiting or something else that really you know

79
00:06:00,760 --> 00:06:02,080
you find your niche.

80
00:06:02,230 --> 00:06:04,790
My niche has always been keep it simple stupid.

81
00:06:04,810 --> 00:06:07,210
And that's exactly what I'm going to do here.

82
00:06:07,210 --> 00:06:09,500
I'm just going to keep it very very simple.

83
00:06:09,610 --> 00:06:16,120
And for this machine I am scanning on TGP I am not scanning on UDP we will focus on that and a later

84
00:06:16,120 --> 00:06:18,790
machine that actually needs the UDP scan.

85
00:06:18,880 --> 00:06:24,840
But in a perfect world and in theory you should be scanning UDP as well.

86
00:06:24,850 --> 00:06:33,100
The only difference here say we want to scan this in UDP is we would just paste this here and we would

87
00:06:33,100 --> 00:06:40,930
add in front of this as you like we saw and that would scan for UDP instead of the stealth scan then

88
00:06:40,930 --> 00:06:47,650
we talked about now we've got our scan back but before we do this this is a for dummies course.

89
00:06:47,660 --> 00:06:51,530
So I want to talk through everything that I possibly can.

90
00:06:51,540 --> 00:06:57,330
First things first we need to talk about the TCB handshake now the three way handshake if you're not

91
00:06:57,330 --> 00:07:03,570
familiar from networking classes is something like this all this type it out real quick and then we

92
00:07:03,570 --> 00:07:04,870
can demonstrate it.

93
00:07:04,890 --> 00:07:10,250
So we've got a sin a sin ACH and then attack.

94
00:07:10,320 --> 00:07:17,910
So when we want to connect to a port add a specific IP address we say hey I want to connect to you.

95
00:07:18,230 --> 00:07:26,740
And this is a sin packet sent right now if we're able to connect to that port that port is open then

96
00:07:27,100 --> 00:07:33,400
the server or IP address that we targeted responds back with sin ach.

97
00:07:33,610 --> 00:07:39,790
And if we want to establish a connection to that port we respond back with ach.

98
00:07:39,790 --> 00:07:41,460
Now we can demonstrate this.

99
00:07:41,590 --> 00:07:49,480
We can come over to here and if we go in we just say something along the lines of Why are shark not

100
00:07:49,480 --> 00:07:50,740
in capitals.

101
00:07:50,740 --> 00:07:57,430
Just say why you're shark and we're going to capture on our ether net zero.

102
00:07:57,430 --> 00:08:04,510
That's absolutely fine and you're gonna see a bunch of stuff starting to come through that's OK.

103
00:08:04,530 --> 00:08:10,920
As well we are looking for a handshake and one quick way we can generate one is just by going out to

104
00:08:10,950 --> 00:08:17,570
Google and hitting Enter and then going a pause this and sorry I smacked my microphone there.

105
00:08:17,570 --> 00:08:26,810
So if you heard a smack that was me and then we can filter by C.P. dot port is equal to four four three

106
00:08:26,870 --> 00:08:35,730
like this and we are just looking for any sort of handshake that came through here that looks like there

107
00:08:35,720 --> 00:08:43,030
is a sin packet sent a sin accent and then we'd have an act packet back.

108
00:08:43,160 --> 00:08:44,980
Normally they're a little closer together.

109
00:08:44,990 --> 00:08:46,810
Let's see if we can find one.

110
00:08:46,910 --> 00:08:47,570
There's a client.

111
00:08:47,570 --> 00:08:48,650
Hello there.

112
00:08:48,650 --> 00:08:51,460
So this is over.

113
00:08:51,950 --> 00:08:53,360
This is over ITV 6.

114
00:08:53,360 --> 00:08:54,600
That's interesting.

115
00:08:54,620 --> 00:08:56,890
So you see that we went out to four for three.

116
00:08:56,900 --> 00:09:02,170
We requested a sin that server responded back to us and said sin act.

117
00:09:02,180 --> 00:09:05,100
You can't connect to my part on four four three.

118
00:09:05,120 --> 00:09:10,360
And then we said OK we acknowledge that we do want to connect and the client said back to us.

119
00:09:10,460 --> 00:09:11,010
Hello.

120
00:09:11,540 --> 00:09:17,460
So this is done over IP six but you can see that there's other things going through as well for IP for.

121
00:09:17,480 --> 00:09:24,070
Looks like most of the traffic coming through right now is IP 6 but yours should probably have IP before

122
00:09:24,080 --> 00:09:27,860
and if you want to capture or similar to this you should be able to capture that three way handshake

123
00:09:28,820 --> 00:09:32,270
why is this important Well let's take a look at this.

124
00:09:33,280 --> 00:09:37,380
So when we are doing scanning we're doing something called stealth scanning.

125
00:09:37,480 --> 00:09:41,950
And like I said earlier this scanning used to be stealthy.

126
00:09:41,980 --> 00:09:43,410
Nowadays it's not stealthy.

127
00:09:43,420 --> 00:09:50,460
If you scan with this you're gonna get picked up by any decent Sim any kind of detection it's gonna

128
00:09:50,470 --> 00:09:54,690
pick you up scanning but you should know what you're doing right.

129
00:09:54,700 --> 00:09:56,650
And this may come up in interviews.

130
00:09:56,680 --> 00:09:57,790
How do you scan.

131
00:09:57,820 --> 00:10:00,660
What's the process for a cell scan.

132
00:10:00,660 --> 00:10:02,590
And only one thing changes.

133
00:10:02,590 --> 00:10:06,290
This act here becomes what's called an iris T.

134
00:10:06,330 --> 00:10:08,920
Now this artist T stands for a reset.

135
00:10:09,010 --> 00:10:13,570
This whole process goes from hey I want to connect you to all right.

136
00:10:13,630 --> 00:10:20,400
You can connect me to us saying no just kidding we actually don't really want to connect.

137
00:10:20,440 --> 00:10:22,210
Well why is this important.

138
00:10:22,210 --> 00:10:28,170
Well we're establishing here that we want to connect to a port in at the port is open.

139
00:10:28,360 --> 00:10:33,930
Well we're going to get a response back that says hey Sinek we're open for business and we're going

140
00:10:33,930 --> 00:10:37,900
to say just kidding because we don't actually want to make the connection to the port.

141
00:10:38,260 --> 00:10:41,710
Now if we make a connection the port we're not really being stealthy.

142
00:10:41,710 --> 00:10:44,070
Again the scanning is not really stealthy anymore.

143
00:10:44,080 --> 00:10:49,500
But this was the logic behind it so let's go ahead and close out of this and let's take a look at our

144
00:10:49,500 --> 00:10:59,600
scan and talk through it so our scan came back and we've got a few things here.

145
00:10:59,680 --> 00:11:06,240
Now we've got our scan result and the scan results dash a gives us a lot of detail.

146
00:11:06,250 --> 00:11:10,930
If we don't trigger with a dash a all we're going to see is the port.

147
00:11:11,170 --> 00:11:13,350
And if it's open that's about it.

148
00:11:13,360 --> 00:11:18,980
You're not going to see service information or version information that could be incredibly useful.

149
00:11:19,240 --> 00:11:24,930
So we could see that two ports came back as open one port came back as closed.

150
00:11:25,030 --> 00:11:30,050
So it triggered on this three three eight nine but it doesn't actually see it as open.

151
00:11:30,080 --> 00:11:31,550
So what does that leave us with.

152
00:11:31,550 --> 00:11:35,630
Well that leaves us with a port one thirty nine and a port for forty five.

153
00:11:35,630 --> 00:11:39,380
And if you're not familiar these are SMB related.

154
00:11:39,380 --> 00:11:47,630
So on windows these tie directly to SMB on Linux 139 would tie to samba which is basically the same

155
00:11:47,630 --> 00:11:48,650
thing.

156
00:11:48,650 --> 00:11:55,240
So these are file shares folders that are out there being shared by a user or accessible by users.

157
00:11:55,250 --> 00:12:02,060
These are very very common when we're scanning internal networks and very common to see you know in

158
00:12:02,060 --> 00:12:07,250
a Windows environment especially but most computers if you think about your work environment have some

159
00:12:07,430 --> 00:12:13,950
sort of shared folder structure so and then it comes down here and it takes a best guess at the Windows

160
00:12:14,010 --> 00:12:15,130
operating system.

161
00:12:15,220 --> 00:12:18,760
Here you can actually see that the version pulled back as Windows XP.

162
00:12:19,260 --> 00:12:19,690
OK.

163
00:12:19,700 --> 00:12:22,410
And it's guessing that it's anywhere from XP to 2008.

164
00:12:22,410 --> 00:12:24,070
That's a really broad guess.

165
00:12:24,090 --> 00:12:27,710
But it's thinking it's windows and it's correct that it's windows.

166
00:12:27,720 --> 00:12:29,190
This is not always correct.

167
00:12:29,190 --> 00:12:30,030
Just a heads up.

168
00:12:30,150 --> 00:12:33,380
But sometimes it gives you an inkling OK.

169
00:12:33,380 --> 00:12:37,740
And then we come down here in this dash a also provide some script results.

170
00:12:37,790 --> 00:12:42,470
Now we can get some things out of here we can see that there is a net bias name of legacy.

171
00:12:42,470 --> 00:12:43,950
That is the computer name.

172
00:12:44,120 --> 00:12:45,550
We also get a mac address.

173
00:12:45,560 --> 00:12:47,570
You can see we're running on a VM where Mac.

174
00:12:47,570 --> 00:12:49,100
That's fine.

175
00:12:49,100 --> 00:12:52,700
And then we come in here and it says OK we're running on Windows XP.

176
00:12:52,700 --> 00:12:54,070
This is a definite.

177
00:12:54,080 --> 00:12:59,540
Now we know for sure that we're running on Windows XP and this is important because if we're fingerprinting

178
00:12:59,540 --> 00:13:05,310
machines and we're looking for exploits these exploits sometimes our operating system dependent.

179
00:13:05,360 --> 00:13:11,870
So knowing the operating system will help us later on a lot of the times again we see the computer name

180
00:13:11,900 --> 00:13:20,360
and the net bios computer name we see the workgroup slash domain here and we can see the security mode

181
00:13:21,630 --> 00:13:22,560
now.

182
00:13:22,720 --> 00:13:28,180
This is going to come up in later videos if you are getting to the more advanced stage you're looking

183
00:13:28,180 --> 00:13:29,620
for internal pen testing.

184
00:13:29,620 --> 00:13:33,730
I do have a video out there on SMB relays and how to get shells.

185
00:13:34,090 --> 00:13:38,390
If you ever see message signing disabled this is dangerous.

186
00:13:38,440 --> 00:13:43,910
You might also see something along the lines of message signing enabled but not required.

187
00:13:44,020 --> 00:13:45,940
That is equally as dangerous.

188
00:13:45,940 --> 00:13:51,010
This is a finding on a pen test report and could allow an attacker to get a shell.

189
00:13:51,010 --> 00:13:55,840
Now I'm just noting that out there so you keep that in the back of your mind not as important for this

190
00:13:55,840 --> 00:14:00,640
lesson today but if you're ever curious there are videos out there and you could read up on this.

191
00:14:00,700 --> 00:14:06,320
But it's a little bit more of advanced topic so down here we have traced out information.

192
00:14:06,320 --> 00:14:13,920
This isn't really that important or attacking an internal lab OK so we have one port really two parts

193
00:14:13,920 --> 00:14:15,030
one service.

194
00:14:15,090 --> 00:14:15,310
OK.

195
00:14:15,330 --> 00:14:17,790
We're going to be attacking SMB.

196
00:14:17,880 --> 00:14:21,610
Now there are a couple of things that I really like to do when I'm looking at SMB.

197
00:14:21,720 --> 00:14:25,260
The first one is I like to go to SMB client.

198
00:14:25,260 --> 00:14:26,910
Now if you never use this that's OK.

199
00:14:26,910 --> 00:14:29,130
It's a built in tool to Kelly linux.

200
00:14:29,220 --> 00:14:35,890
You just start typing SMB client and you can hit TAB and it should autocomplete for you.

201
00:14:35,890 --> 00:14:41,420
The next is a dash L that is to list out any of the files that are in there.

202
00:14:41,580 --> 00:14:45,720
And then we're just going to type in the IP address similar to this.

203
00:14:45,720 --> 00:14:51,370
And we said we were at DOT for I believe and hit enter.

204
00:14:51,810 --> 00:14:53,020
So invalid parameter.

205
00:14:53,050 --> 00:15:00,490
Let's try one other thing I like to do it would double or quadruple and then double on the backslash

206
00:15:00,490 --> 00:15:00,970
is there.

207
00:15:00,970 --> 00:15:01,380
Let's try.

208
00:15:01,380 --> 00:15:04,130
Alan still getting invalid parameter.

209
00:15:04,210 --> 00:15:09,060
We might not be able to access this with the the way it's listed right now.

210
00:15:09,070 --> 00:15:13,940
We can try connecting and you can see there's just really no connection here.

211
00:15:13,990 --> 00:15:16,300
We could try listed out all different kinds of ways.

212
00:15:16,330 --> 00:15:17,480
And it's just not going to work.

213
00:15:17,920 --> 00:15:27,010
Now in some cases if we had a a root password that was anonymous and we tried to log in it would say

214
00:15:27,040 --> 00:15:28,330
hey you're in.

215
00:15:28,330 --> 00:15:31,230
Here's a listing of all the files that are in the share.

216
00:15:31,390 --> 00:15:33,700
That's bad in this case.

217
00:15:33,700 --> 00:15:39,920
We're not getting a listing of all the files in the share we're getting this status invalid parameter.

218
00:15:40,210 --> 00:15:45,730
And it as of right now is kind of a dead end and that's OK.

219
00:15:45,730 --> 00:15:51,730
So if we were able to connect which you'll see in later videos we can use SMB client and say there was

220
00:15:51,730 --> 00:15:58,270
like a common one is a dot admin folder here and we say admin and we want to connect to that.

221
00:15:58,450 --> 00:16:04,380
We could try to connect and it would let us connect with password or no password then we're money right.

222
00:16:04,390 --> 00:16:09,040
We we can enumerate the share we can pull down information but here we're just not getting any access

223
00:16:09,040 --> 00:16:09,640
at all.

224
00:16:10,060 --> 00:16:11,700
So and that's fine.

225
00:16:11,710 --> 00:16:15,810
So what we're gonna do instead is we're going to enumerate this a little further.

226
00:16:16,180 --> 00:16:21,260
Now a tool that is out there and you may have heard of is called a noon for Linux.

227
00:16:21,430 --> 00:16:24,430
I don't like using this if you like using it that's fine.

228
00:16:24,430 --> 00:16:27,700
In my case in most instances I've ever tried using it.

229
00:16:27,700 --> 00:16:29,920
It has not work has been broken.

230
00:16:29,920 --> 00:16:37,360
So what I like to do is actually run medicinally which is MSF console hit enter on that and it's going

231
00:16:37,360 --> 00:16:41,870
to take a second to spin up especially if this is your first time spinning it up.

232
00:16:41,910 --> 00:16:48,740
Now let's let this run here and then I'm going to search for SMP underscore version.

233
00:16:49,920 --> 00:16:56,340
Now this didn't come up when we first did our map scan and that's OK that's kind of common but we can

234
00:16:56,340 --> 00:17:03,440
copy this auxiliary scanner here and we can use this to try to detect it now let's talk about Metis

235
00:17:03,440 --> 00:17:04,660
boy as well.

236
00:17:04,880 --> 00:17:09,600
And I should note that my explanations I'm not going to repeat myself as we go further and further into

237
00:17:09,610 --> 00:17:10,110
videos.

238
00:17:10,130 --> 00:17:14,930
I'm going to assume that you have watched the previous video and that you kind of understand where we're

239
00:17:14,930 --> 00:17:16,150
at as we go along.

240
00:17:16,160 --> 00:17:21,590
But this video's probably gonna be really really detailed and broken down on some of these topics especially

241
00:17:21,590 --> 00:17:23,040
if you've never seen it before.

242
00:17:23,330 --> 00:17:28,720
So auxiliary modules now there's a few different modules you can see here there's exploits auxiliary

243
00:17:28,720 --> 00:17:33,890
posed payloads etc. Meadows boy is a treasure trove of options.

244
00:17:33,920 --> 00:17:42,200
Now what we're doing is auxiliary and we can think of auxiliary as pre exploit so auxiliary is our scanning

245
00:17:42,230 --> 00:17:45,100
our enumeration our information gathering.

246
00:17:45,140 --> 00:17:50,870
There are over a thousand different auxiliary modules in this instance we are using auxiliary module

247
00:17:50,870 --> 00:17:53,510
to look for an SMB version.

248
00:17:53,630 --> 00:17:56,850
It does not always work but it works a lot.

249
00:17:57,170 --> 00:18:04,550
Now the SMB version is really really important if we can pull it down because historically SMB has been

250
00:18:04,550 --> 00:18:06,350
incredibly vulnerable.

251
00:18:06,350 --> 00:18:13,250
If you can think back to Most recently we have had the want to cry slash Eternal Blue slash whatever

252
00:18:13,250 --> 00:18:20,510
you want to call it the M.S. 17 dash 0 1 0 exploit ramp SMB and in the past as you're going to see in

253
00:18:20,510 --> 00:18:21,190
a minute.

254
00:18:21,260 --> 00:18:25,100
There have been numerous SMB exploits.

255
00:18:25,100 --> 00:18:31,750
So because of that it's very critical to try to detect not only the version but the operating system

256
00:18:31,750 --> 00:18:34,370
you're running on because that is important as well.

257
00:18:34,370 --> 00:18:37,090
Now we already have an operating system listed here.

258
00:18:37,190 --> 00:18:44,390
So we're gonna go ahead and just try to find a version we're gonna say options and you can see here

259
00:18:44,390 --> 00:18:46,580
what's required and what's not.

260
00:18:46,640 --> 00:18:51,660
Only thing that's really required of us that is not set already here is this.

261
00:18:51,680 --> 00:18:52,850
Our hosts.

262
00:18:52,880 --> 00:18:54,810
So that stands for remote host.

263
00:18:54,980 --> 00:18:58,030
All you can think about is that's what we're going to be attacking.

264
00:18:58,040 --> 00:19:03,640
Now we can say set our host tend not to hand out turned up for now.

265
00:19:03,710 --> 00:19:08,610
If this module can only take one host it will say our host.

266
00:19:08,810 --> 00:19:12,010
If you notice this can actually take multiple hosts with an s.

267
00:19:12,050 --> 00:19:18,080
You can enter in a side or notation and you could do something like slash twenty four if you're trying

268
00:19:18,080 --> 00:19:20,030
to see every single machine in the network.

269
00:19:20,540 --> 00:19:23,870
But in this instance we're only attacking one box setting one.

270
00:19:23,870 --> 00:19:26,150
Our host is fine.

271
00:19:26,150 --> 00:19:26,790
OK.

272
00:19:26,840 --> 00:19:30,180
We can say options again just to make sure it really set for us.

273
00:19:30,200 --> 00:19:35,150
And then we're going to type in a run or if you really want to feel cool you can type an exploit.

274
00:19:35,810 --> 00:19:40,690
Either way at all where and we can see here.

275
00:19:40,930 --> 00:19:41,440
OK.

276
00:19:41,470 --> 00:19:49,150
Now we are running Windows XP Service Pack 3 and it really doesn't tell us anything else about the SMB

277
00:19:49,150 --> 00:19:49,690
version.

278
00:19:49,720 --> 00:19:50,670
That's a bummer.

279
00:19:51,400 --> 00:19:53,960
So we don't know anything else but S&amp;P version.

280
00:19:54,070 --> 00:19:59,920
That's OK we can start with what we know so we'll copy this information then right and we're going to

281
00:19:59,920 --> 00:20:06,670
go out to Firefox and just go back to Google if you went to there when you were doing our our handshake

282
00:20:06,850 --> 00:20:13,630
and we'll just paste this in and then Google will learn you eventually but if you start typing an exploit

283
00:20:14,290 --> 00:20:15,880
It'll start coming up.

284
00:20:16,150 --> 00:20:16,600
Right.

285
00:20:17,020 --> 00:20:22,420
So we can start looking for the different types of exploits that exist.

286
00:20:22,420 --> 00:20:25,780
One that I like to look for there's two Web sites.

287
00:20:25,810 --> 00:20:26,850
OK.

288
00:20:26,890 --> 00:20:29,690
In my opinion there's two Web sites I look for out the bad.

289
00:20:29,800 --> 00:20:32,290
One is exploit D.B. dot com.

290
00:20:32,290 --> 00:20:33,910
We can open this one.

291
00:20:33,910 --> 00:20:35,820
The other one is rapid 7.

292
00:20:36,100 --> 00:20:40,300
So let's look at both and here.

293
00:20:40,310 --> 00:20:43,940
This is a PSP three exploit.

294
00:20:45,020 --> 00:20:46,430
It's possible.

295
00:20:46,430 --> 00:20:52,850
Now one thing that we didn't do and I should have typed in is we didn't describe the service and that's

296
00:20:52,850 --> 00:20:54,140
bad on my part.

297
00:20:54,200 --> 00:21:00,020
Let's type an SMB Windows 3 and now because I looked at this and I said I'm not sure that that's actually

298
00:21:00,020 --> 00:21:00,820
SMB.

299
00:21:00,830 --> 00:21:07,470
Let's go ahead and close this one and the first one that comes up for us is actually going to be M.S.

300
00:21:07,490 --> 00:21:09,290
0 8 0 6 7.

301
00:21:09,290 --> 00:21:14,750
Now this possible that this is on exploit database but you can see one of the things that comes up on

302
00:21:14,750 --> 00:21:20,620
your save tabs if you're on a newer version of Cally is your exploit dash DV exploit database.

303
00:21:20,630 --> 00:21:27,460
This is where you're gonna find a lot of exploits that you can just download perhaps modify and run.

304
00:21:28,220 --> 00:21:34,680
But here today we're not going to have to do that rapid 7 is the other Web site that I like a lot.

305
00:21:34,690 --> 00:21:35,920
Why is that.

306
00:21:35,920 --> 00:21:41,370
That's because rapid 7 actually makes this here are medicinally.

307
00:21:41,500 --> 00:21:48,130
So because they make Meadows blight and because it's medicinal a module we come here we can see that

308
00:21:48,130 --> 00:21:54,260
this is actually a medicinal module that means we can just run this in those fly and perhaps get a shell.

309
00:21:54,280 --> 00:21:59,320
We don't have to mess with exploits of exploit D.B. we don't have to download anything it's already

310
00:21:59,320 --> 00:22:02,090
built into a tool that we have.

311
00:22:02,140 --> 00:22:05,310
OK so let's go ahead and just look at the directions here.

312
00:22:05,310 --> 00:22:12,020
It's always best to read the instructions and see if this has to deal with what we're dealing with.

313
00:22:12,060 --> 00:22:19,140
So it says that a target's Windows XP but two thousand three will often crash or hang.

314
00:22:19,140 --> 00:22:24,810
So it's important to note that in case we're running on a pen test and we don't want to you know crash

315
00:22:24,810 --> 00:22:31,320
a server it's always important to see you know if if there's any kind of denial of service here right

316
00:22:31,320 --> 00:22:32,920
now this looks good.

317
00:22:32,950 --> 00:22:38,190
We're gonna do is we're just going to copy this and we're going to paste it here

318
00:22:41,110 --> 00:22:47,490
and then we can just say options again similarly we have these set our host.

319
00:22:47,510 --> 00:22:55,430
Now I can just tab up to where I set the our host and is still that and now it says exploit target.

320
00:22:55,850 --> 00:23:01,370
So it's always best practice to say show targets to see what kind of targets are available for us.

321
00:23:01,370 --> 00:23:02,290
And holy crap.

322
00:23:02,300 --> 00:23:08,510
There are 72 so we know we're running SPF 3 windows XP XP 3.

323
00:23:08,510 --> 00:23:14,800
Probably the English version if we wanted to pick it out but we could just leave this alone.

324
00:23:14,810 --> 00:23:18,970
It looks like there's automatic targeting and it will figure it out on its own.

325
00:23:19,190 --> 00:23:24,320
If for some reason we are sure on this exploit and the automatic targeting is failing now we can come

326
00:23:24,320 --> 00:23:27,270
down here pick out the target and go from there.

327
00:23:27,350 --> 00:23:28,790
But let's go ahead and take a look.

328
00:23:28,790 --> 00:23:30,860
By just running this and seeing what happens

329
00:23:33,620 --> 00:23:40,390
and it's detecting the target it detected that it is XP XP 3 English perfect and then it ran it and

330
00:23:40,390 --> 00:23:43,640
said maternity session one opened.

331
00:23:43,640 --> 00:23:44,150
Great.

332
00:23:44,150 --> 00:23:48,310
This means we have a shell we have access on the machine.

333
00:23:48,510 --> 00:23:51,080
Now what we just did is called a reverse shell.

334
00:23:51,090 --> 00:23:54,600
There are mainly two different types of shells that we could run.

335
00:23:54,600 --> 00:23:58,530
One is a reverse shell and one is the other is a bind shell.

336
00:23:58,590 --> 00:24:02,570
Now reverse shells what they do is we set up a listener.

337
00:24:02,580 --> 00:24:04,360
We set up a port that we're listening on.

338
00:24:04,410 --> 00:24:05,880
See this handler here.

339
00:24:05,880 --> 00:24:08,590
So we're listening on port four four four four.

340
00:24:09,030 --> 00:24:14,820
When we exploit the machine we tell it hey connect back to this IP address on these ports.

341
00:24:15,000 --> 00:24:16,350
And that is a reverse shell.

342
00:24:16,380 --> 00:24:21,720
When a victim connects back to us that is considered reverse shell.

343
00:24:21,720 --> 00:24:23,320
When we connect to a victim.

344
00:24:23,340 --> 00:24:30,900
So say we run an exploit and we open up a port and then we say hey let's connect to that port that is

345
00:24:30,900 --> 00:24:32,970
considered a bind shell.

346
00:24:33,120 --> 00:24:39,840
The majority of your time when you're doing lab testing is going to be running with reverse shells.

347
00:24:40,050 --> 00:24:47,820
Even when you're doing internal testing now external testing if you're doing real pain tests sometimes

348
00:24:47,820 --> 00:24:53,220
you're going to want to use a bind shell unless you want to setup port forwards on your router or wherever

349
00:24:53,220 --> 00:24:56,360
you're testing in order to trigger back into your machine.

350
00:24:56,430 --> 00:24:59,360
A lot of times is just way easier to do a buying shell.

351
00:24:59,390 --> 00:25:01,920
But sometimes you have to get flexible and do both.

352
00:25:02,250 --> 00:25:05,980
But the majority of time you're gonna be working with reverse shell.

353
00:25:06,030 --> 00:25:09,030
So from here a couple of things we should do.

354
00:25:09,060 --> 00:25:13,400
The first thing is we could say get you I.D. let's see what user level we're at.

355
00:25:13,960 --> 00:25:14,310
Okay.

356
00:25:14,310 --> 00:25:19,680
We are a authority system now authority system is the highest level if we are a system we have own this

357
00:25:19,680 --> 00:25:24,060
machine completely and we just lost our session here.

358
00:25:24,060 --> 00:25:24,840
Not sure why.

359
00:25:24,840 --> 00:25:32,190
Let's go ahead and run it again see what happens and it's possible that we we lost this machine here.

360
00:25:32,190 --> 00:25:33,420
So let's go ahead and just see

361
00:25:36,170 --> 00:25:37,730
and there is a connection timeout.

362
00:25:38,060 --> 00:25:40,400
So I've had this happen with hacked the box as well.

363
00:25:41,030 --> 00:25:46,970
So what happens sometimes is hack the box just you know you lose the you lose your session and hack

364
00:25:46,970 --> 00:25:51,170
the box it used to be that somebody could reset the box on you.

365
00:25:51,890 --> 00:25:54,270
It looks like that.

366
00:25:54,520 --> 00:25:59,620
You can actually still reset on people so I'm not sure if somebody just reset the box on me or what

367
00:25:59,620 --> 00:26:05,410
happened but hopefully you don't have this experience but this is a good one to keep in the video just

368
00:26:05,410 --> 00:26:07,490
in case you ever run into this.

369
00:26:07,500 --> 00:26:10,330
So team you're trying to run it it might not work right this second.

370
00:26:10,330 --> 00:26:11,610
That's fine.

371
00:26:11,690 --> 00:26:15,270
Let's go ahead and talk about this anti authorities system.

372
00:26:15,430 --> 00:26:24,010
So when we're system on a machine that means we have the highest highest privilege level we can do whatever

373
00:26:24,010 --> 00:26:25,720
we want on that machine.

374
00:26:25,720 --> 00:26:26,020
Right.

375
00:26:26,020 --> 00:26:31,510
This is a local local level but we are full authority.

376
00:26:31,510 --> 00:26:35,790
This is equivalent if you are a Linux user to being root on a Linux machine.

377
00:26:36,340 --> 00:26:37,080
OK.

378
00:26:37,090 --> 00:26:43,170
So we have the highest potential level that that we that we need here right.

379
00:26:43,180 --> 00:26:45,850
So let's go ahead and try to run one more time.

380
00:26:45,970 --> 00:26:53,840
If this fails I'm going to go ahead and refresh and try restarting my box on my end and

381
00:26:56,530 --> 00:27:01,250
somebody has cancel termination of the machine.

382
00:27:01,250 --> 00:27:02,100
Don't know what that is.

383
00:27:02,140 --> 00:27:03,790
Guys I'm going to pause this video.

384
00:27:03,800 --> 00:27:06,230
Get the shell back up and then figure that out.

385
00:27:06,230 --> 00:27:07,580
Give me one second.

386
00:27:07,610 --> 00:27:08,150
All right.

387
00:27:08,150 --> 00:27:10,660
I am back and we have a new session.

388
00:27:10,760 --> 00:27:17,810
So again we did it get you Idi and let's go ahead and look at one other thing here we're gonna get assists

389
00:27:17,840 --> 00:27:25,260
info and what we're looking at facility info is we're looking at this here we want to make sure that

390
00:27:25,260 --> 00:27:31,740
we have an architecture that matches the mature fritters shell so our x eighty six here on the architecture

391
00:27:32,220 --> 00:27:38,930
matches the mature British shell on windows this is good this allows us to do a lot.

392
00:27:39,030 --> 00:27:45,580
So one of the things that we can do and let's type and help with your brand new to meadows flight we

393
00:27:45,580 --> 00:27:50,830
have a lot of things that we can do here that come through look at this list.

394
00:27:50,840 --> 00:27:53,290
Now don't be intimidated by this list.

395
00:27:53,330 --> 00:27:58,860
You will learn it as it goes in most of these you'll probably never use some of the interesting things

396
00:27:58,860 --> 00:28:01,240
as we can navigate around the file system.

397
00:28:01,370 --> 00:28:03,780
We can download files from the file system.

398
00:28:03,890 --> 00:28:08,020
We can upload files to the file system and we can make directories.

399
00:28:08,240 --> 00:28:12,790
We could do a lot of Linux commands that are typical if you're used to using Linux.

400
00:28:12,800 --> 00:28:15,530
There are some great networking commands.

401
00:28:15,530 --> 00:28:21,950
Now if we're doing post exploitation we get a shell in the machine and we are in a real network looking

402
00:28:21,950 --> 00:28:23,890
at the ARP table or the ARB cache.

403
00:28:23,930 --> 00:28:27,320
Really good looking at your IP address your eye.

404
00:28:27,380 --> 00:28:33,170
I have config IP config really good looking at your routing table really good net stack.

405
00:28:33,230 --> 00:28:34,070
Same thing.

406
00:28:34,400 --> 00:28:39,320
So looking at where you're at from a networking perspective once you get a shell.

407
00:28:39,440 --> 00:28:41,570
Very very good idea.

408
00:28:41,630 --> 00:28:45,110
Some other things that we can look at we can see what processes are running.

409
00:28:45,110 --> 00:28:46,900
This is very useful.

410
00:28:46,910 --> 00:28:49,380
We can shut down the machine if we want to.

411
00:28:49,400 --> 00:28:56,160
We can do some crazy stuff too like a key scan or a keystroke.

412
00:28:56,450 --> 00:29:00,720
Dumping here we can capture the keystrokes and we can dump them.

413
00:29:01,010 --> 00:29:01,750
Very scary.

414
00:29:01,760 --> 00:29:04,640
We can do a screenshot of the desktop.

415
00:29:04,640 --> 00:29:07,310
We can do a screenshot of the webcam.

416
00:29:07,400 --> 00:29:09,260
We can record the microphone.

417
00:29:09,260 --> 00:29:11,030
This can be incredibly malicious.

418
00:29:11,030 --> 00:29:12,110
Right.

419
00:29:12,140 --> 00:29:17,020
These are things that we should not be doing unless we have absolute permission to do them.

420
00:29:17,120 --> 00:29:19,880
So Metis boy is just just show you.

421
00:29:19,880 --> 00:29:21,850
It's a very powerful tool.

422
00:29:21,860 --> 00:29:24,210
Now there's a couple of things in here that we can do.

423
00:29:24,440 --> 00:29:30,710
If we did not have authority system we could try to just type and get system sometimes as crashes a

424
00:29:30,710 --> 00:29:31,250
machine.

425
00:29:31,250 --> 00:29:35,500
So if you have a shell on a machine in a network and you're doing a real pen death.

426
00:29:35,600 --> 00:29:36,790
Be very careful with this.

427
00:29:36,790 --> 00:29:39,650
Perhaps ask how sensitive the machine is.

428
00:29:39,650 --> 00:29:42,720
And if you crash it as somebody available to turn it back on.

429
00:29:42,920 --> 00:29:47,510
So no of this one and no this one hash them.

430
00:29:47,570 --> 00:29:49,950
Now let's type in hashtag.

431
00:29:50,950 --> 00:29:54,470
Now hashtag is dumping these Sam.

432
00:29:54,560 --> 00:30:01,250
Now the Sam is what stores are local user passwords and we are dumping the hashes here.

433
00:30:01,700 --> 00:30:08,660
So with these hashes we can take these off line and use a tool something like John the Ripper or hash

434
00:30:08,660 --> 00:30:12,830
cat and we can try to crack these against the word list.

435
00:30:12,830 --> 00:30:17,030
Now if you never cracked passwords before this is something maybe you should look into if you're at

436
00:30:17,030 --> 00:30:17,910
this point.

437
00:30:18,080 --> 00:30:20,980
Take these off line and go try to crack them.

438
00:30:20,990 --> 00:30:22,880
I have no idea what's going to come up.

439
00:30:22,880 --> 00:30:26,810
You can eliminate the guest the help assistant and probably the support.

440
00:30:26,840 --> 00:30:31,430
I would try to crack the administrator password and this John user account and see if you can get either

441
00:30:31,430 --> 00:30:34,100
of them as I said I haven't done this before.

442
00:30:34,120 --> 00:30:38,240
So you could try and see if either of them are crackle against a worry list.

443
00:30:38,270 --> 00:30:39,960
It's always good practice.

444
00:30:40,040 --> 00:30:47,030
Now another thing you could do is copy the hash here the second part of the hash and you can use tools

445
00:30:47,240 --> 00:30:50,660
like crack map Zack or PSA Zack.

446
00:30:50,690 --> 00:30:54,920
There's a lot of tools out there where we can take this hash and try to do something called past the

447
00:30:54,920 --> 00:30:55,830
hash.

448
00:30:55,850 --> 00:30:59,330
Now it's not going to work in this network and that's OK.

449
00:30:59,330 --> 00:31:04,670
This whole lesson and course is going to be about enumeration and exploitation.

450
00:31:04,670 --> 00:31:07,880
It's not really going to be about all the advanced attacks we can do.

451
00:31:07,880 --> 00:31:12,990
There are other courses out there the zero to hero talks about these topics as well.

452
00:31:13,010 --> 00:31:16,510
So what we're really after is again enumeration exploitation.

453
00:31:16,530 --> 00:31:22,820
I'm giving you some ideas of things that we look for once where once we're in a machine this hash here

454
00:31:22,850 --> 00:31:24,000
we can pass that around.

455
00:31:24,000 --> 00:31:26,490
See if it gets us in any other machines in the network.

456
00:31:26,660 --> 00:31:31,730
Again it's not going to work here because we're only against this one machine in this one isolated network

457
00:31:32,660 --> 00:31:37,910
and we could try again to crack it and we can see it that pass where the ATM and password logs is in

458
00:31:37,910 --> 00:31:38,840
anywhere.

459
00:31:38,840 --> 00:31:44,390
I have an impersonal experience never cracked an administrative password but gained access to every

460
00:31:44,390 --> 00:31:49,790
single machine in a network because they were passing the hash around they were using the same hash

461
00:31:49,790 --> 00:31:50,990
on every single machine.

462
00:31:50,990 --> 00:31:56,040
So very critical to check this trying to pass it around see where you can access to.

463
00:31:56,120 --> 00:31:58,410
Very very easy to do.

464
00:31:58,520 --> 00:32:05,330
So from here we can also type in the word shell and you will notice that this gives us something similar

465
00:32:05,330 --> 00:32:12,140
to a command prompt if you are following along and you're you're doing these machines and you want to

466
00:32:12,140 --> 00:32:15,080
have some fun take credit.

467
00:32:15,080 --> 00:32:22,100
One thing that we can do is we can see over to the users folder and looks like let's see you to see

468
00:32:22,100 --> 00:32:22,510
this night.

469
00:32:22,520 --> 00:32:24,830
This is an older machine it's going to be something different.

470
00:32:25,310 --> 00:32:27,430
It's going to be documents and settings.

471
00:32:27,440 --> 00:32:34,670
So we'll see these in the documents and settings and then we'll say they're here and then we can go

472
00:32:34,670 --> 00:32:43,940
into John and we can say they're just show you but we could type going to see the desktop and then we're

473
00:32:43,950 --> 00:32:47,250
gonna say there one more time and we'll type it and type.

474
00:32:47,300 --> 00:32:49,320
User got.

475
00:32:49,440 --> 00:32:50,760
Now you can take this.

476
00:32:50,910 --> 00:32:52,850
I don't know if I've already done this for this machine.

477
00:32:52,850 --> 00:32:59,640
You can copy this one income over a legacy and then you can just go into submit user flag and that'll

478
00:32:59,640 --> 00:33:00,890
work just fine.

479
00:33:00,900 --> 00:33:05,520
So it'll it'll submit your flag for you and then you can do the same thing with the root.

480
00:33:05,820 --> 00:33:16,140
So you can just go you can go see the administrator slash desktop and then on the desktop you should

481
00:33:16,140 --> 00:33:18,390
have the root text.

482
00:33:18,420 --> 00:33:24,660
You can go ahead and type that and also capture that that flag there and submit it to hack the box.

483
00:33:24,660 --> 00:33:28,220
You won't get any points for it but you can count it under underneath your own.

484
00:33:28,270 --> 00:33:32,580
Well you know which ones you've done before and you haven't done before.

485
00:33:32,580 --> 00:33:39,150
So with that being said other things that we're doing in the shell here we can be looking for you know

486
00:33:39,150 --> 00:33:45,270
we could be looking for sensitive files and data things that are out there if you like to navigate around

487
00:33:45,270 --> 00:33:45,930
a shell.

488
00:33:46,020 --> 00:33:51,890
You can absolutely do the same thing from a medicine point slash maternal critter shell so we can hit

489
00:33:51,890 --> 00:33:56,070
control C and go yes we want to cancel but we're still in the shell right.

490
00:33:56,100 --> 00:33:58,140
We could save TWD.

491
00:33:58,140 --> 00:34:02,380
We could seeded a seed of all that slash like this WD.

492
00:34:02,910 --> 00:34:07,100
And there's a little bit of character escaping you saw I had to use two back slashes.

493
00:34:07,290 --> 00:34:09,060
That's pretty pretty standard.

494
00:34:09,060 --> 00:34:13,440
We can do a dir here and you're seeing pretty much the same stuff that we just were.

495
00:34:13,440 --> 00:34:16,230
So you don't actually have to dive into a shell.

496
00:34:16,230 --> 00:34:18,930
This is just showing you the flexibility of return fritter.
